WATER & DIESEL POLY TANKS

 

         


                                   

WATER TANKS

Poly Water 20 Lt HD Jerry Can with Tap

 

WTP20JT

Item Weight:2.00 kg

Height:470.0 mm

Width:160.0 mm

Depth:350.0 mm

 

 

Poly Water 40Lt Dbl Jerry Can

 

Poly Water Tank 40Lt Cube Tank (Similar shape to 2 x 20Lt Jerry Cans)

WTP40J

Item Weight:4.00 kg

Height:350.0 mm

Width:350.0 mm

Depth:460.0 mm

Poly Footwell Tank 40Lt

 

Poly Water Tank 40 Lt Footwell with recess to suit most modern 4WD Wagons & Utes. Inc 1/2" BSP brass outlets

Dimensions: 1200mm wide x 190mm high ( 30mm for cap) & 250mm Deep.

The transmission tunnel recess is 420mm wide at the base tapering to 200mm wide at top of recess, and is 110mm high.

The cut-out for centre consoles is 200mm wide and 60mm deep.

Two Brass outlets are fitted (one at each end) and uses 1/2" BSPT thread to allow normal hardware plumbing fittings to be used for custom hose or pump kits.

Or you may prefer to order our Hose or Pump kits

WTP40FW

Poly Water 42Lt Vert Mnt

 

Poly Water Tank 42 Lt Vertical with wheel arch cut-outs. 1/2in BSP brass outlet

Dimensions: 1295mm wide x 600mm high ( 30mm for cap) 75mm thick. The cutout each side is 200mm wide x 300mm high. An additional small rebate contains the brass outlet.

Brass outlet uses 1/2" BSPT thread to allow normal hardware plumbing fittings to be used for custom hose or pump kits.

Or you may prefer to order our Hose or Pump kits

WTP48V

Poly Water 45Lt Vert & Flat

 

Poly Water Tank 45 Lt can be fitted in Vertical or Flat Position. 1/2'' BSP brass outlet. Requires separate filler kit.

This tank comes with nutserts intstalled. These are not designed to hold the full weight of the tank but can assist in stabilising (stoping the tank from sliding). It is always recomended to support the tank with metal straps using the indents and holes.

Filler sold seperately.

WTP45FV

Item Weight:8.00 kg

Height:90.0 mm

Width:1090.0 mm

Depth:580.0 mm

Poly Water 50Lt Taper

 

Poly Water Tank 50 Lt Taper Rectangular Universal for Behind Seats etc. 1/2'' BSP brass outlet

Dimensions: 1000mm wide x 350mm high ( 30mm for cap). Depth varies from 200mm at the base to 150mm at the top.

Brass outlet uses 1/2" BSPT thread to allow normal hardware plumbing fittings to be used for custom hose or pump kits.

Or you may prefer to order our Hose or Pump kits

WTP50T

Poly Water 55Lt Ute Mnt

 

Poly Water Tank 55 Lt Ute or Roof Rack Mounting

WTP55U

Item Weight:5.00 kg

Height:320.0 mm

Width:200.0 mm

Depth:1130.0 mm

Poly Water 58Lt Vert & Flat

 

Poly Water Tank 58Lt Rectangular Universal with recessed outlets for optional mounting in Vertical or Flat Position. 1/2'' BSP brass outlet. Requires separate filler kit.

This tank comes with nutserts intstalled. These are not designed to hold the full weight of the tank but can assist in stabilising (stoping the tank from sliding). It is always recomended to support the tank with metal straps using the indents.

Filler sold seperately.

WTP60FV

Item Weight:6.00 kg

Height:235.0 mm

Width:840.0 mm

Depth:345.0 mm

Poly Water 80Lt Under Tray

 

Poly Water Tank 80 Lt Flat Under Ute or Truck Tray Mount

The filler uses a 1.5" BSP thread with an adjacent 1/2" BSP insert to attach a fast fill breather line if necessary. Two 1/2" BSP outlets are fitted on the bottom to give a choice of exit to the tap or plumbing system.

Dimensions: 805W x 1070L mm

Height: Tank - 110mm, Inlet position - 170mm, outlet position - 140mm

WTP80F

Poly Water 120Lt Univ Rect

 

Poly Water Tank 120 Lt Universal Rectangle

WTP120U

Item Weight:9.00 kg

Height:350.0 mm

Width:500.0 mm

Depth:810.0 mm   

 

Cap suit Poly Tanks

 

Replacement Screwon Cap suit Boab Poly Tanks

WTPCAP

Cap w Clip suit Poly Tanks

 

Replacement Screwon Cap suit most Poly Tanks - with Security Clip

WTPCAPC 

12mm Hose Kit suit BOAB Tanks

 

12mm Hose Kit 1.5m long with Tap & Clamps

WTPHK2

Pump 12v suit BOAB Water Tanks

 

Electric Water Pump 12v suit BOAB water tanks 3.8lpm 12v 2.5amp 35PSI cut-off

WTPump12v  

10mm Hose Kit for ElectPump

 

10mm Hose Kit 2m long for use with 12v Electric Water Pump

Comprises - 2 metres of 10mm reinforced hose, 5 clamps, 3 tail fittings and a mini ball valve

Please note fittings are now in Diesel safe plastic.

WTPHK3

                                                                                                           DIESEL TANKS

Poly Diesel 40Lt Dbl Jerry

 

NEW Poly Diesel Tank 40Lt Cube Tank (Similar shape to 2 x 20Lt Jerry Cans). Yellow colour

FTP40J 

Poly Diesel Tank 40Lt Footwell

 

Poly Diesel Tank 40 Lt Footwell Shape (twin outlets) Yellow colour.

Dimensions: 1200mm wide x 190mm high ( 30mm for cap) & 250mm Deep.

The transmission tunnel recess is 420mm wide at the base tapering to 200mm wide at top of recess, and is 110mm high.

The cut-out for centre consoles is 200mm wide and 60mm deep.

Two Brass outlets with 1/2" BSPT female thread are fitted - one at each end. A blanking plug for the unused end and a hose adaptor to suit 3/8" (10mm) hose are included.

At the top of the tank near the filler cap is a 1/4" BSP brass insert and included with the tank is a vent and short hose kit. This allows the tank to breath and the short 500mm hose allows the vent to be fitted well above the top of tank.

If mounting the tank inside a vehicle we highly recommend using our optional vent extension kit (Part No FTUVK) which can either extend the location of the standard vent or more preferably allow the tank to be connected to the vehicles main fuel tank ventilation system.

FTP40FW

Poly Diesel Tank 55Lt Univ Fit

 

NEW Poly Diesel Tank 55 Lt Rectangular Universal Fit. Yellow Colour.

FTP55U

Item Weight:6.00 kg

Height:350.0 mm

Width:1140.0 mm

Depth:210.0 mm  

Filler Neck Diesel Tank

 

Filler Neck for Diesel Tank (Black-Red)

FTPFN

Hose Kit suit Poly Fuel Tank

 

Fuel Hose & Fuel Tap Kit 1.5m suit Universal Poly Fuel Tanks

FTU55PK 

Cap Vented suit Poly Fuel Tank

 

Replacement Vented Screwon Cap suit BOAB Poly Tanks

FTUCAP


  

 

 

20L PLASTIC JERRY CAN WATER TANK

 

Water in the outback is liquid gold,  so set up your vehicle with an Ironman 4x4 Water Tank.

The Ironman 4x4 20L Plastic Jerry Can Water Tank is built tough from food grade UV Stabilised Polyethylene ensures you can enjoy clean, taste free water.

  • Designed to suit standard jerry can holders
  • Integrated tap
  • Dimensions: 350 x 170 x 460mm

40L DOUBLE JERRY CAN WATER TANK

 

Water in the outback can be scarce, but it doesn’t have to be when you set up your vehicle with an Ironman 4x4 Water Tank.

The Ironman 4x4 40L Double Jerry Can Water Tank is built tough from food grade UV Stabilised Polyethylene ensures you can enjoy clean, taste free water.

  • Can be mounted vertical or horizontal
  • Recessed barbed outlet
  • Dimensions: 465 x 340 x 335mm 

40L VERTICAL WATER TANK

 

The Ironman 4x4 40L Vertical Water Tank is built tough from food grade UV Stabilised Polyethylene ensures you can enjoy clean, taste free water.

  • Designed to fit in tight cargo spaces
  • Recessed barbed outlet
  • Dimensions: 1100 x 75 x 675mm (700mm including the height of the screw cap)

50L ROOF RACK WATER TANK

 

The Ironman 4x4 50L Roof Tank Water Tank is built tough from food grade UV Stabilised Polyethylene ensures you can enjoy clean, taste free water.

  • Flat mounted
  • Recessed barbed outlet
  • Dimensions: 1200 x 600 x 85mm (120mm including the height of the screw cap)  

50L WHEEL ARCH WATER TANK

 

The Ironman 4x4 50L Wheel Arch Water Tank is built tough from food grade UV Stabilised Polyethylene ensures you can enjoy clean, taste free water.

  • Designed to fit securely between wheel arches
  • Recessed barbed outlet
  • Dimensions: 1215 x 120 x 555mm (590mm including the height of the screw cap)

50L TAPERED WATER TANK

 

The Ironman 4x4 50L Tapered Water Tank is built tough from food grade UV Stabilised Polyethylene ensures you can enjoy clean, taste free water.

  • Ideal for mounting behind seats
  • Recessed barbed tap outlet
  • Dimensions: 1050 x 200 x 350mm (390mm including the height of the screw cap) 

60L WATER TANK

 

The Ironman 4x4 60L Water Tank is built tough from food grade UV Stabilised Polyethylene ensures you can enjoy clean, taste free water.

  • Recessed barbed tap outlet
  • Dimensions: 845 x 360 x 230mm (270mm including the height of the screw cap)

15L UNDER TRAY HAND WASH TANK

 

The 15L Under Tray Hand Wash Tank is manufactured from food grade UV stabilised polyethylene (LLDPE) for maximum strength and durability. Designed to mount under tray, and featuring a recessed valve tap located at base of tank with he refill inlet located at top of front face and a in built soap dispenser holder, compatible with Ironman 4x4 500ml Gritty Hand Wash  

WATER HOSE KIT

 

Complimenting the Water Tank range is the Ironman 4x4 Water Hose Kit. A high quality 1.5m long clear water hose, complete with tap.